Electromagnetic Immunity - AGFA DR 14s User Manual

Electromagnetic immunity

This DR Detector is intended for operation in the electromagnetic
environment given below. The user of the DR Detector should ensure that it is
used in such an environment.
Resistance to
Jamming Test
Discharge of
static electrici-
ty in accord-
ance with
IEC 61000-4-2
Fast transient
electrical dis-
turbance vari-
ables / bursts
in accordance
with IEC
61000-4-4
Impulse vol-
tages (surges)
in accordance
with IEC
61000-4-5
Voltage break-
throughs,
short term in-
terruptions
and variations
in the voltage
supplied in ac-
cordance with
IEC
61000-4-11
DR 14s | Remarks for HF-emission and immunity | 113
IEC 60601 Level of
Test Level Agreement
± 6 kV contact ± 6 contact
discharge discharge
± 8 kV air dis- ± 8 kV air dis-
charge charge
± 2 kV for net- ± 2 kV for net-
work leads work leads
± 1 kV for en- not applicable
try and outlet
leads
± 1 kV push- ± 1 kV push-
pull voltage pull voltage
± 2 kV com- ± 2 kV com-
mon mode mon mode
voltage voltage
< 5% Ur not applicable
(> 95% break-
through of Ur)
for ½ period
40% Ur (>
60% break-
through of Ur)
for 5 periods
70% Ur (30%
breakthrough
of Ur) for 25
periods
< 5% Ur (95%
breakthrough
of Ur) for 5 s
Electromagnetic Envi-
ronment Guidelines
Floors should consist of
wood, concrete or ce-
ramic tiles. The relative
humidity must be at least
30%, if the floor is made
of synthetic material.
The quality of the volt-
age supplied should cor-
respond to a typical com-
mercial or clinical envi-
ronment.
The quality of the volt-
age supplied should cor-
respond to that of a typi-
cal commercial or clini-
cal environment.
The quality of the volt-
age supply should corre-
spond to that of a typical
commercial or clinical
environment. If the user
wants the DR Detector to
work continuously, even
when the energy supply
is interrupted, it is rec-
ommended to use an en-
ergy supply free of inter-
ruptions or a battery.
0350B EN 20190319 1349 *