30 | Crystal Imager | Advanced Operation (key-operator mode)
Changing the hostname
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. In the 'Network (DICOM)' screen, press the Down key, followed by the
Confirm key to select 'Hostname'.
The 'Hostname' screen is displayed:
If the Hostname has already been assigned, it will be shown on the display.
3. Change the hostname by means of the arrow keys. The hostname is limited
to 16 characters.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
Changing the domain name
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. On the 'Network (DICOM)' screen, press the Down key twice, followed by
the Confirm key to select 'Domain name'.
The 'Domain name' screen is displayed:
3830B EN 20210520 0952
on page 12
on page 23