Table of Contents
Advertisement
6. Press the up/down arrow keys to increment/decrement the numbers or
the month. Press the left/right arrow keys to move through the digits.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Time' screen is displayed:
8. Press the up/down arrow keys to increment/decrement the numbers.
Press the left/right arrow keys to move through the digits.
9. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Printer installation wizard' screen will appear:
10. Press the Confirm key to continue.
A screen with information on the sequence of the steps will appear:
settings
2.Host specific
settings
3.Save configuration
11. Press the Confirm key to start with step 1 or press the Escape key to quit
the procedure.
Related Links
Data entry
on page 12
Entering the printer network settings
Some instruction screens will show the information you need to complete this
part of the installation:
1. Press the Confirm key to continue.
in case of subnets
-Router IP-address
in case of subnets
-Printer AE-title
--------------------
ask your network
administrator for
this information
Crystal Imager | Advanced Operation (key-operator mode) | 73
3830B EN 20210520 0952
Advertisement
Table of Contents
