Table of Contents
Advertisement
58 | Crystal Imager | Advanced Operation (key-operator mode)
3. Do one of the following:
• If you want to back up the current configuration on an external USB
• If you only want to restore the configurations on the printer internal
4. When the restoring of the save set file is finished, the following screen is
displayed (when necessary):
Related Links
Accessing the restore configuration menu
General save configuration procedure
3830B EN 20210520 0952
Note: Before restoring the save set file, you have the
opportunity to save the current configuration. Therefore, the
'Update back-up on USB-stick' screen is displayed.
flash drive, press the Confirm key (YES). The printer will perform the
'General save configuration procedure'.
media, press the Escape key (NO) and proceed with step 4.
on page 55
on page 50
Advertisement
Table of Contents
