Safety Checks - Napoleon PTHC38PK Manual,Instructions & Parts List

NOTE: Always check the following
connections.
Check all connections on the hose regulator
assembly.
Check the regulator to the LP gas cylinder
connection. Note that the regulator adapter is
a reverse thread.
Check the hose to the intake pipe to make
certain that it is not kinked or in a position that
could cause it to kink. Hand tighten and then
take a 1/2 turn with an adjustable wrench.
The remaining connections are to be tested after
this heater has been lit. (SEE LIGHTING
INSTRUCTIONS PAGE10)
Check for leak
Your Patio Heater has been checked at all
factory connections for leaks,To check at the
Connection at the gas hose/regulator/cylinder.
1) Make leak solution by mixing 1part liquid
dishsoap and 3 parts water.
2) Spoon several drops (or use squit bottle)
of the solution onto the gas hose/regulator
and regulator/cylinder connection.
3) Inspect the connections and look for bubbles.
4) If no bubbles appear, the connection is safe.
5) If bubble appear, there is leak,loose and
re-tighten this connection.
9

SAFETY CHECKS

SAFETY CHECKS