Controls And Functions; External Control Panel - Mitsubishi SE2U User Manual

Controls and Functions

External Control Panel

1. Power (Refer to pages
more information.)
Turns the projector on or off.
2. SOURCE (Refer to page
information.)
Sequentially selects the input signal
RGB/YP
3 Left
3.
Right 4
4.
When the on-screen menu is not
activated, #3 and #4 function as
Keystone -/+ hot keys.
(Refer to page
information.)
5EXIT
5.
Exits and saves the menu settings.
6MENU
6.
Turns the on-screen display control
menu on.When the on-screen menu is
activated, the #3 to #6 buttons are used
as directional arrows to select the
desired menu items and to make
adjustments. Refer to page
information.
7. AUTO POSITION (Refer to page
for more information.)
Automatically determines the best
picture timings for the displayed
image.
8 Introduction
9
5
3
1
2
6
17 and
20 for more
P , Video or S-Video.
b r
19 for more
24
13
12
10
11
4
8
7
18 for 8. MUTE (Refer to page
information.)
Used to hide the screen image and
disable the audio. You can press Mute
again to bring the image and audio
back.
9. POWER indicator light
Lights up or flashes when the projector
is under operation.
10. TEMP (Temperature) warning light
(Refer to page
tion.)
Flashes red if the projector's
temperature becomes too high.
11. LAMP indicator light (Refer to page
32 for more information.)
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
12. Zoom ring
Adjusts the size of the image.
Rotate clockwise to enlarge the image
for more or rotate counter-clockwise to make
the image smaller.
20 13. Focus ring
Adjusts the focus of the projected
image.
21 for more
34 for more informa-