Maintenance and repair
27/40
1
3
4
2
5
563814-07
Fig. 15:
Oiling the toothed belt
10.3.2 Bearings
The bearings have lifelong lubrication and are maintenance-free under normal
conditions of use.
10.3.3 Gear
The gears are maintenance-free under normal conditions of use.
10.3.4 Motor
To ensure adequate cooling of the motors, regularly remove dirt and dust deposits:
• from the surface of the motor,
• from the intake openings on the fan hood,
• from between the cooling ribs.
The cleaning intervals depend on the ambient and operating conditions.
10.4 Replacement of wear parts
Required tools
• Hex wrench SW13.
• Hex socket wrenches SW3, SW4, SW5.
• Phillips screwdriver PH2
• Caliper, 500 mm
• Hammer
• Drift punch
3 842 563 815/2021-11, MIT: BS 1/..., Bosch Rexroth AG