Advertisement
Quick Start Guide
Access the Web Browser
The default network settings are as shown below:
•
•
•
•
•
You may use the above default settings when you log in the camera for the first time.
1.
2. Open a browser and enter the default address of IP-CAM and confirm.
3. Download and run the plugin in the computer.
4. Enter the default username and password in the login interface to log in.
9
4MP H.265 IP IR Eyeball Camera with 2.8mm Lens
IP address: 192.168.226.201
HTTP:80
Subnet Mask: 255.255.255.0
Data Port:9008
Gateway: 192.168.226.1
Set the IP address of the PC and make sure the network segment should be as the
same as the default settings of IP-CAM. Open the network and share center. Click
"Local Area Connection" to pop up the following window. Select "Properties" and
then select Internet protocol according to the actual situation (for example: IPv4).
Next, click "Properties" button to set the network of the PC.
Advertisement
