Connectors; Floppy Disk Drive Connector: Fdd1; Hard Disk Connectors: Ide1 & Ide2 - MSI MS- 9130 v1.x User Manual

The mainboard provides connectors to connect FDD, IDE HDD, front
panel of the system case, audio ports, USB Ports, and CPU/System FANs.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that
supports 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB floppy disk types.
FDD1
Hard Disk Connectors: IDE1 & IDE2
The mainboard provides a 32-bit Enhanced PCI IDE and Ultra DMA 33/
66/100/133 controller that supports PIO mode 0 ~ 4, Bus Master, and Ultra
DMA 33/66/100/133 function. You can connect up to four hard disk drives,
CD-ROM drives, 120MB floppy disk drive (reserved for future BIOS), and
other devices.
MSI Reminds You...
If you install two hard disks on cable, you must configure the
second drive to Slave mode by setting its jumper. Refer to the hard
disk documentation supplied by hard disk vendors for jumper
setting instructions.

Connectors

Hardware Setup
IDE1
IDE2
2-15