Quick Start Guide; Detergent Use; Operating Controls; Options And Modifiers - Maytag Bravos W10092826B Use And Care Manual

NOTE: The panel shown above may be different from that of your model.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
The following is a guide to using your washer. Please refer to specific sections of this manual for more detailed information.

OPERATING CONTROLS

Start/Pause - Press START/PAUSE to start your washer after
a cycle has been selected. Be sure all desired Modifiers and
Options have been selected. The lid must be closed for the
washer to start.
Power/Cancel - Press POWER/CANCEL once to pause or
stop the washer at any time. Press POWER/CANCEL once
to unlock the lid and add a garment. Press START/PAUSE
to complete the cycle from where it was stopped. Press
POWER/CANCEL twice to stop the wash cycle.The washer
will then drain and turn off.
Lid Lock - When the Lid Lock status light glows, the washer
lid is locked.
NOTE: You must wait until the Lid Lock Light turns off before
the lid can be opened.
ADD A GARMENT, PAUSING, OR
RESTARTING the WASHER
Allows you to add garments to the washer
after the wash cycle begins. The ADD A
GARMENT indicator light will illuminate, at
which time, you can:
Press POWER/CANCEL. (Lid Lock light turns off, then
open the lid.)
Add garments. (Close washer lid.)
Press START/PAUSE to restart.
To unlock the lid after the Add a garment period,
Press POWER/CANCEL once. Pressing POWER/CANCEL
twice will cancel the wash cycle.
6

QUICK START GUIDE

DETERGENT USE

Use only High Efficiency (HE) detergents.
Using regular detergent will likely result in
wash errors, longer cycle times, and
reduced rinsing performance.
For more information, see "Using the Proper Detergent."

OPTIONS and MODIFIERS

You can change Options and Modifiers anytime
before Start is pressed.
Press POWER/CANCEL.
Select Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START/PAUSE or select DELAY WASH (on some
models) to start wash at a later time.
Changing cycles after pressing Start:
Press POWER/CANCEL twice to cancel the cycle.
Select desired Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START/PAUSE or select DELAY WASH (on some
models) to start wash at a later time. Washer restarts at the
beginning of the new cycle.
NOTE: To help protect your garments, not all OPTIONS and
MODIFIERS can be selected with all wash cycles.
STOPPING YOUR WASHER
You can stop the wash cycle and drain the tub by pressing
the Pause/Cancel button twice or the Power button once.