JVC XV-C3SL Service Manual page 9

2.1.5 Removing the rear panel and audio output board
(see Fig.7)
• Prior to performing the following procedure, remove the top
cover.
(1) Remove the nine screws E attaching the rear panel.
(2) Disconnect the card wire from connector CN706 on the
audio output board.
(3) Remove the one screw F attaching the audio output board.
(4) Disconnect the power cord from socket P901 on the main
board.
2.1.6 Removing the main board
(see Fig.8)
• Prior to performing the following procedure, remove the top
cover, front panel assembly, bracket, mechanism assembly,
rear panel and audio output board.
(1) Remove the four screws G attaching the main board.
XV-C3SL
Fig.7
Fig.8
9