Operator Support; Straight Arm - Chamberlain GT Owner's Manual

OPERATOR SUPPORT

1. The illustration below shows a typical method of
hanging the operator from the ceiling. Each installa-
tion may vary, but in all cases side braces should be
used for additional strength.
2. For mounting of the support brace(s) to the pow-
erhead, Four holes (clearance up to 3/8" bolts) are
located on each side of frame.
NOTE: If the operator is longer than 15 feet, use of a
mid-span support is recommended.
WARNING
FAILURE TO SUSPEND THE OPERATOR SECURELY
MAY RESULT IN SERIOUS PERSONAL INJURY OR
DEATH, AND/OR PROPERTY DAMAGE.
CAUTION
INSTALLATION INSTRUCTIONS
6
WARNING
WARNING