Table of Contents
Advertisement
DISPLAY
(3)
(2)
(1)
(1) Main Information Display
This display shows messages relating to the status, input source,
surround mode, tuner, volume level or other aspects of unit's
operation.
(2) ENCODED SIGNAL indicators
2DIGITAL, 2SURROUND, dts, PCM, and HDCD
When the selected input is a digital source, one of these indicators
will light to display the specific type of signal in use.
(3) Analog Input Indicator
This indicator lights when an analog input source has been selected.
(4) TUNER's indicators
STEREO :
This indicator illuminates when an FM station is being tuned in stereo.
AUTO :
This indicator illuminates when the tuner's Auto mode is in use.
TUNED :
This indicator illuminates when a station is being received with
sufficient signal strength to provide acceptable listening quality.
(5) Multiroom Indicator
This indicator lights when the multiroom system is active.
(6) Sleep Indicator
This indicator lights when the Sleep function is in use.
(7) Copy Indicators
This indicator lights when VCR1 COPY. TAPE, COPY, or DIGITAL
COPY system is active.
(8) Night Mode Indicator
This indicator lights when the SR-14EX is in the Night mode, which
reduces the dynamic range of digital program material at low volume
levels.
(9) PEAK indicator
This indicator is a monitor for an analog audio input signal. If the
selected analog audio input signal is greater than the capable level of
internal processing, this will light. If this happens, you should press
the ATT button.
(4)
(5)
(8)
(6) (7)
(10) Attenuation indicator
This indicator lights when the attenuation function is active.
(11) Display Off indicator
This indicator lights when the SR-14EX is in the display off mode.
(12) ENCODED CHANNEL STATUS indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch
or DTS 5.1ch, "L", "C", "R", "LS", "RS" and "LFE" will light up.If the
digital input signal is 2 channel PCM-audio, "L" and "R" will be
displayed. If Dolby Digital 5.1ch signal with Surround EX flag comes
in, "L", "C", "R", "LS", "S" , "RS" and "LFE" will show.
9
(9)
(12)
(10)(11)
Hide quick links:
Advertisement
Table of Contents
