Introduction; Product Description - Siemens APACS+ Installation And Service Instruction

Remote i/o rack

Hide thumbs Also See for APACS+:

Table of Contents

SD39RIO-1

1.0 Introduction

This Instruction provides installation and service information for the Remote I/O Rack (P/N 16426-1), a

four slot rack that houses one to four plug-in APACS+™ or QUADLOG

divided into six major sections.

•

Section 1, Introduction - Provides a product description, support information, and lists related literature.

•

Section 2, Installation - Describes environmental considerations and mechanical and electrical installation

procedures.

•

Section 3, Maintenance - Provides periodic maintenance procedures, repair recommendations, and

suggestions for spare and replacement parts.

•

Section 4, Circuit Description - Briefly describes the backplane circuitry and signals.

•

Section 5, Accessories, Attachments, and Options - Lists the available accessories, attachments, and

options available for the Remote I/O Rack.

•

Section 6, Specifications – Lists the rack's mechanical, electrical, and environmental specifications.

The Remote I/O Rack, shown in Figure 1-1, is a four-slot rack intended to house up to four plug-in APACS+

or QUADLOG I/O modules. All I/O modules are hot-swap capable. This means a module can be replaced

while the power to the Remote I/O Rack is on.

January 2001

Figure 1-1 Remote I/O Rack

INTRODUCTION

I/O modules. This Instruction is

1-1

Table of Contents

Quadlog