Accessories, Attachments, And Options; Accessories; Attachments; Options - Siemens APACS+ Installation And Service Instruction

SD39RIO-1

5.0 Accessories, Attachments, and Options

5.1 Accessories

Table 5-1 lists the accessories for the Remote I/O Rack.
Part Number
16137-60 (single piece)
16056-593

5.2 Attachments

Table 5-2 lists the attachments that are provided with each Remote I/O Rack.
Part Number
16056-384
14784-9 (single piece)
16066-21 (single piece)
16405-1 (single piece)

5.3 Options

Table 5-3 lists the options for the Remote I/O Rack. Consult your system drawings to determine the quantity
and types of optional cables required. The Remote I/O Rack requires a selection of terminated or
unterminated Interconnect I/O Cable Assemblies and a selection of IOBUS A/B cables. If fiber optics are
involved, a Fiber Optic Expander (IFX) and fiber optic cable are required.
January 2001
TABLE 5-1 Remote I/O Rack Accessories
Power Supply Cable. Connects Remote I/O Rack to 24 Vdc power supply.
M-BUS/IOBUS Cable Adapter Kit. Converts connector spring latch type
security to screw lock type security (and vice versa)
TABLE 5-2 Remote I/O Rack Attachments
Remote I/O Rack Keying Kit. A bag containing 24 stop plugs to mechanically
interface I/O modules to the Remote I/O Rack. Kit comes attached to the
rack.
Jumpers W1 to W3 (OK Loop). Factory installed in the backplane assembly.
IOBUS Shunt Module Assembly (W4). Factory installed in the backplane.
IOBUS Attenuator Module Assembly. Included with rack.
ACCESSORIES, ATTACHMENTS, AND OPTIONS
Description
Description
5-1