Normal Operation - Pentair S2000-SEA User Manual

NOTE: Initially, the water may appear cloudy. This is a result of air trapped in the post-polishing filter. It
is not harmful and will disappear in a matter of minutes. It may take up to a week after installing a new
post-polishing filter for the trapped air to dissipate.
The system is ready for operation. You can now enjoy quality water from your Reverse Osmosis System.

5.2. Normal Operation

• During normal use, simply turn on the faucet.
• After a prolonged period of non-use, flush the system until clear water is being dispensed out from
the faucet.
LED Screen
Every time the power is turned on, the white LED on the display will blink once, followed by the red LED.
Thereafter, the machine goes into operation state. Every key pressed is acknowledged by an audible
beep. If there is no operation for 5 minutes, the display will go into screen-saver mode. Pressing any key
will wake up the display. The machine then immediately enters the operation state.
Water Production
Open the faucet, the machine will start producing water. During water production, the Processing Icon
and the text "Processing" will light up. During standby, the Processing Icon and the text "Processing" will
turn off.
Flushing
• Each time the machine is powered on, it will automatically flush for 30 seconds.
• For every 3 minutes of accumulated water production, it will flush for 5 seconds.
• Press the 'Flush" button to flush the machine for 30 seconds before entering the operation state.
• In the flushing state, press the 'Flush' button to abort the flushing process.
• While flushing, the Flushing Icon and the text "Flushing' will light up.
• If flushing is aborted, the Flushing Icon and the text 'Flushing' will turn off.
RO
Processing Flushing Leak Error
Filter 1 Filter 2 Filter 3
Select Flush Reset
Processing Flushing Leak Error
Filter 1 Filter 2 Filter 3
Select
Flush Reset
*Front display panel color depends on model.
RO
13