Approved Multitools; Adjusting The Bicycle Handle; Fuel - Stihl MM 56 Instruction Manual

4 Approved MultiTools

courses and are supplied with the necessary
technical information.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine. If you have any questions in this
respect, consult a servicing dealer.
STIHL recommends the use of genuine STIHL
replacement parts. These parts are specifically
designed to match your machine model and
meet your performance requirements.
To reduce the risk of injury from unintentional
engine startup, always shut off the engine and
disconnect the spark plug boot before performing
any repairs, maintenance or cleaning work. –
Exception: Carburetor and idle speed adjust‐
ments.
Do not turn the engine over on the starter with
the spark plug boot or spark plug removed since
there is otherwise a risk of fire from uncontained
sparking.
To reduce the risk of fire, do not service or store
your machine near open flames.
Check the fuel filler cap for leaks at regular inter‐
vals.
Use only a spark plug of the type approved by
STIHL and make sure it is in good condition –
see "Specifications".
Inspect the ignition lead (insulation in good con‐
dition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to hearing,
do not operate your machine if the muffler is
damaged or missing.
Do not touch a hot muffler since burn injury will
result.
4 Approved MultiTools
The following STIHL MultiTools may be mounted
on the MultiEngine:
0458-489-0121-C
BF-MM
BK-MM
MF-MM
KW-MM
MultiTool
BF‑MM
BK‑MM
RL‑MM
FC‑MM
MF‑MM
KW‑MM
KB‑MM
5 Adjusting the bicycle han‐
dle
► Loosen the knob (1).
► Swing the bicycle handle with both hands into
the working position (as far as stop).
► Tighten down the knob firmly.
6

Fuel

The engine requires a mixture of gasoline and
engine oil.
English
RL-MM
FC-MM
KB-MM
Application
Pick tines
Bolo tines
Aerator
Edger
Dethatcher
PowerSweep
Bristle brush
1
7