Stihl MM 56 Instruction Manual page 10

English
4
► Depress the manual fuel pump bulb (4) at
least five times – even if the bulb is filled with
fuel.
8.2.1 Cold engine (cold start)
5
► Depress the choke knob (5) and turn it to g
at the same time.
8.2.2 Warm engine (warm start)
5
► Depress in the choke knob (5) and turn it to <
at the same time.
Also use this setting if the engine has been run‐
ning but is still cold.
8.2.3 Cranking
► Retract the wheels, if fitted.
10
8 Starting / Stopping the Engine
► Put the unit on the ground: It must rest
securely on the engine flange and the support
on the frame. Check that the MultiTool is not
touching the ground or any other obstacles –
see also "Starting / Stopping the Engine" in the
MultiTool instruction manual.
► Make sure you have secure footing – as
shown. To reduce the risk of injury from con‐
tact with rotating attachments, always stand to
the side of the power tool.
► With your left hand on the carrying handle,
press the unit firmly against the ground.
NOTICE
Do not stand or kneel on the shaft.
► Hold the starter grip with your right hand.
► Pull the starter grip slowly until you feel it
engage and then give it a brisk strong pull.
0458-489-0121-C