Wheels - Stihl MM 56 Instruction Manual

English
1 2
► Push the extra weight (1) with bolt through the
bore (6) in the flange, turning it until the
square end (2) engages the recess in the
flange.
► Screw the inner weight (5) onto the bolt and
tighten it down firmly.
► Screw the outer weight (4) with the hex head
screw (3) into the thread of the inner weight
and tighten it down firmly.
One of two weights may be mounted on each
side of the extra weight as required.
Weight on each
side
1
2
NOTICE
The maximum allowable extra weight is 4 kg.
Never use a heavier extra weight as this may
damage the machine.
MultiEngine with wheels
If the MultiEngine is already equipped with
wheels (special accessory), see chapter on
"Wheels", additional parts are required to mount
the extra weights.
In such a case have the extra weight mounted by
your servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer.

10 Wheels

For convenient transport, the MultiEngine can be
retrofitted with a set of wheels (special acces‐
sory).
Always use original STIHL wheels. Using other
wheels can lead to damage to the machine and
personal injuries.
12
4
6 5
Total extra weight
2 kg
4 kg
10.1 Installing wheels
No additional weight is attached to the MultiEn‐
gine
To simplify installation, turn the machine so that
it rests on the handles.
3
2
4
3 1
6
7
► Insert the two sleeves (1) in the frame
► Push the frame onto the flange
► Insert the bolt (2) with the washer (3) through
the hole (4) in the flange
► Fit the washer (3) and tighten it down with the
nut (5)
► Fasten the notched plate (6) to the frame with
the screws (7) in the threaded holes – in the
process, push the notched plate toward the
handle
► The wheels must fold down automatically in
working position; if necessary, loosen the
nut (5) by a quarter turn
Additional weight is attached to the MultiEngine
If additional weight (special accessory) – see
"Additional weight" – is already attached to the
MultiEngine, then additional parts are required in
order to install wheels.
In this case, have the wheels installed by a serv‐
icing dealer.
STIHL recommends that maintenance and repair
work be carried out only by authorized STIHL
dealers.
10 Wheels
5
3
1
7
0458-489-0121-C