Changing The Switch - Bernard T-Gun 445-45 Owner's Manual

7-2 Changing the Switch

1. Twist handle locking caps.
2. Pull handle locking caps away from handle.
3. Remove Phillips screw.
4. Separate handle.
5. Remove switch from nest in handle.
6. Remove switch from switch lead connectors with needle nose
pliers.
7. Push switch lead connectors firmly onto switch terminals with
needle nose pliers.
8. Fit switch into nest on handle. Switch leads must lie parallel.
9. Reinstall handle halves and locking cap.
16 TG408-1.2
Figure 7-A