Table of Contents
Advertisement
1
Preparing the Machine
No Parts Required
Procedure
Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
You may discard all removed parts unless
otherwise noted.
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the
-
position to engage the parking
NEUTRAL
LOCK
brake.
4.
Shut off the engine and remove the key.
5.
Raise the seat, refer to your machine Operator's
Manual.
6.
Raise the rear of the machine on jack stands;
refer to your machine Operator's Manual.
WARNING
Supporting the machine on the lower
muffler shield
the shield and cause the machine to fall,
injuring you or bystanders.
Do not use the lower muffler shield to
support the machine.
1. Lower muffler shield
(Figure
1) may damage
Figure 1
7.
Remove the rear tires as shown in
Note:
Retain all wheel components for later
installation.
g299647
4
Figure 2
Figure 2
g309984
Advertisement
Table of Contents
