Overview - Lincoln Electric D1.8 User Manual

8 D1.8 Seismic Supplement Welding Manual
Overview of D1.8
Content.
FEMA 353 identified a variety of factors that made the pre-Northridge connection "...inherently susceptible
to brittle fracture..." and then listed variables that can be grouped into the broad categories of overall
structural design, connection design, connection details, materials, workmanship and inspection. While most
of the design-related issues are covered in AISC standards, D1.8 addresses connection details, materials,
workmanship and inspection issues.
These topics are covered in seven clauses as follows:
Clause 1
Clause 2
Clause 3
Clause 4
Clause 5
Clause 6
Clause 7
Following these clauses are eight mandatory annexes as follows:
Annex A
Annex B
Annex D
Annex E
Annex F
Annex G
Annex H
Annex I
Finally, the document concludes with an extensive commentary that provides background material and
explains the Structural Welding Committee's intent behind many of the provisions, as well as an index.
New.Terminology.
In a manner that has been coordinated with the applicable AISC committees, D1.8 utilizes some new
terminology. An understanding of these terms, officially defined in Clause 3: Terms and Definitions of D1.8,
is necessary to properly apply the code.
www.lincolnelectric.com
General Requirements
Reference Documents
Definitions
Welded Connection Details
Welder Qualification
Fabrication
Inspection
WPS Heat Input Envelope Testing of Filler Metals for Demand Critical Welds
Intermix CVN Testing of Filler Metal Combinations (where one of the filler metals is FCAW-S)
Supplemental Welder Qualification for Restricted Access Welding
Supplemental Testing for Extended Exposure Limits for FCAW Filler Metals
Supplemental Ultrasonic Technician Testing
Supplemental Magnetic Particle Testing Procedures
Flaw Sizing by Ultrasonic Testing
Guidelines for the Preparation of Technical Inquiries for the Structural Welding Committee