Sony SNC-CH135 Release Notes page 9

Release Note
1.3. Compatibility
There is no change on CGI command, RTSP, other network protocols and the streaming
format. It is compatible with Ver. 1.87 about connectivity between the external network
devices and the camera.
2. Note on Upgrading Firmware
When upgrading the firmware, you should use the SNC toolbox of Ver. 1.3.8.0 or later. Refer
to the release note of the SNC toolbox for the details of cameras supported by the SNC
toolbox.
See "Using the SNC toolbox" section in the User's Guide for the usage.
3. Newly Added Function in Ver. 1.88
3.1. The security has been enhanced.
4. Problems corrected in Ver.1.88
4.1. Fixed a problem that camera image might not be displayed in ActiveX viewer.
There is a problem that the camera image may not be displayed when connecting to the
camera with Internet Explorer (IE). When the problem occurs, a × mark is displayed at the
upper left of the ActiveX viewer (And motion detection setting monitor screen). This problem
was corrected.
(Problem from Ver.1.87)
5. Newly Added Functions in Ver. 1.87
5.1. The security has been enhanced.
[Note] When you fail in installation of ActiveX, apply the latest Windows security patches.
6. Function changed and Problems corrected in Ver.1.87
There is no function which is changed and there is no problem which is fixed in this version.
7. Newly Added Functions in Ver. 1.86
7.1. The security has been enhanced.
7.2. ONVIF Ver. 16.07 support
Conformance testing has been passed with ONVIF Device Test Tool Version 16.07.
8. Function changed and Problems corrected in Ver.1.86
There was a problem that the camera rarely fails to start up correctly. This problem has been
corrected.
(Problem from Ver. 1.05)
9. Newly Added Functions in Ver. 1.85
9.1. Windows 8.1 IE11 support
This version supports Internet Explorer 11 (IE11) in Desktop User Interface Mode on
Windows 8.1. But it does not support IE11 launching from Start Screen in Windows 8.1 and
it has no evaluations of IE11 for Windows 7.
9
Sony Corporation