Application Configuration Url - LevelOne FCS-1050 User Manual

Application configuration URL

URL: /setup/app.cgi
NAME VALUE
emode <not required>
smode <not required>
smethod mail
ftp
suffix <not required>
delay <integer>
inter <integer>
dihigh < not required >
dilow < not required >
dirise < not required >
difall < not required >
motion1 < not required >
motion2 < not required >
motion3 < not required >
ioalarm < not required >
mdalarm < not required >
ioupload < not required >
mdupload < not required >
sinter <integer>
sbegin <hh:mm:ss>
send <hh:mm:ss>
DESCRIPTION
event mode application
sequential mode application
upload snapshots by email
upload snapshots by FTP
FTP file with date and time suffix
seconds delay to detect next event
seconds delay to capture post-event
set DI high as trigger condition
set DI low as trigger condition
set DI rising as trigger condition
set DI falling as trigger condition
set motion
condition
set motion
condition
set motion
condition
trigger DO
matched
trigger DO when motion detected
upload snapshot when DI condition
matched
upload snapshot
detected
seconds interval for sequential mode
time to start sequential mode
time to stop sequential mode
- 58 -
window1 as trigger
window2 as trigger
window3 as trigger
when DI condition
when motion