KTI Networks KGS-2404 User Manual page 73

10. When
Authentication server, the port you are using is set to be
unauthorized.
The 802.1X "Enabled" is the type of authentication supported in the switch. In
this mode, for the devices connected to this port, once a supplicant is authorized,
the devices connected to this port can access the network resource through this
port.
802.1x Port-based Network Access Control function supported by the switch
is little bit complex, for it just support basic "Enabled" mode, which can distinguish
the device's MAC address and its VID. The following table is the summary of the
combination of the authentication status and the port status versus the status of port
mode, set in 802.1x Port mode, port control state, set in 802.1x port setting. Here
Entry Authorized means MAC entry is authorized.
Port Mode
Disable Don't Care
Enabled Auto
Enabled Auto
Enabled ForceUnauthorized
Enabled ForceAuthorized
Function name:
802.1X Configuration
the supplicant issue
Fig. 4-15
Port Control Authentication
Don't Care
Successful
Failure
Don't Care
Don't Care
67
an EAP-Logoff message
Port Status
Port Uncontrolled
Port Authorized
Port Unauthorized
Port Unauthorized
Port Authorized
to