KTI Networks KGS-2404 User Manual page 26

Web smart 24-port gigabit ethernet switch

Hide thumbs Also See for KGS-2404:

Table of Contents

For different network applications, the subnet mask may look like

255.255.255.240. This means it is a small network accommodating a maximum of

15 nodes in the network.

Default gateway:

For the routed packet, if the destination is not in the routing table, all the

traffic is put into the device with the designated IP address, known as default router.

Basically, it is a routing policy.

For assigning an IP address to the switch, you just have to check what the IP

address of the network will be connected with the switch. Use the same network

address and append your host address to it.

First, IP Address: as shown in the Fig. 2-9, enter "192.168.1.1", for instance.

For sure, an IP address such as 192.168.1.x must be set on your PC.

Second, Subnet Mask: as shown in the Fig. 2-9, enter "255.255.255.0". Any

subnet mask such as 255.255.255.x is allowable in this case.

Fig. 2-9

Table of Contents