Table of Contents
Advertisement
4-2-6. LACP
Smart Web Switch supports link aggregation IEEE802.3ad standard. The
standard describes Link Aggregate Control Protocol (LACP) which dynamically
creates and manages trunk groups.
When you enable LACP link aggregation on a port, the port can automatically
negotiate with the ports at the remote end of a link to establish trunk groups. LACP
also allows port redundancy, that is, if an operational port fails, then one of the
"standby" ports become operational without user intervention.
Function name:
LACP Port Configuration
Function description:
Enable or disable LACP protocol, user is allowed to set the aggregation key
value.
Parameter description:
Protocol Enabled:
Just tick the check box (
<Apply> button to apply.
Key Value:
It's key for an aggregation. This must be an integer value between 1 and
255 or auto select by switch.
)
to enable LACP protocol then press the
Fig. 4-11 LACP Port Configuration
61
Advertisement
Table of Contents
