Pair On/Off; Rec Select - Korg D8 Owner's Manual

26. PAIR On/Off

P1-1 Pairing on/off .............................................. [On, Off]
Turns pairing on/off for the mixer channels.
Mixer settings of adjacent odd and even numbered
channels (1-2, 3-4 and 5-6) can be linked so that
changes to the setting of one channel will be simulta-
neously reflected by the setting of other channel.
The following mixer settings can be pairing.
[TRACK STATUS] key, High EQ "HEQ", Low EQ
"LEQ", Effect Send "Snd", Aux send "Aux", Balance
([PAN] knobs), and the channel volume level ([CHAN-
NEL] faders).
For each of these parameters except for [TRACK STA-
TUS] and [CHANNEL] fader, you can specify whether
or not the parameter will be paired. (Refer to EDIT
SYSTEM P3 "Channel pair enable setting".)
Pairing can be switched on/off by simultaneously
pressing the [EFFECT SEND] keys of the channels that
you wish to pair.
"HEQ", "LEQ", "Snd" and "Aux" can be set from
either the odd or even numbered channel.
In the case of the [CHANNEL] faders and [BALANCE
(PAN)] knobs*, only the odd numbered channel of the
pair can be set.
When pairing is On, the selected channel number for a
setting such as EQ that is included in the pair will be
displayed as "-" (e.g., HEQ1-2).
When pairing is Off, the selected channel number for
settings such as EQ will be displayed normally (e.g.,
HEQ1).
* PAN will adjust the pan to the master bus if Pairing
is Off, or the left/right balance to the master bus if
Pairing is On.
1
Snd1-2:000
60

27. REC SELECT

Input/recording source select..............................................
[INPUT 1/2, INPUT 1/2+MASTER, MASTER, DIGITAL IN]
Selects the source for input and recording.
INPUT 1/2 (indicator lit): Select this when you wish to
connect an external device such as a guitar, keyboard
or mic to the INPUT 1/2 jacks for normal input or
recording.
INPUT 1/2
MASTER
DIGITAL IN
REC
SELECT
INPUT 1/2+MASTER (both indicators lit): Select this
when you wish to record the input from the bus master
(bounce), or to record the input from an external
device connected to the INPUT 1/2 jacks together with
the other tracks.
INPUT 1/2
MASTER
DIGITAL IN
REC
SELECT
MASTER (indicator lit): Select this when you wish to
record the input from the master bus, or when you
wish to bounce all the playback sound of all eight
tracks.
INPUT 1/2
MASTER
DIGITAL IN
REC
SELECT
DIGITAL IN (indicator lit): Select this when you wish
to record from an external device such as a CD, MD or
DAT that is connected to the DIGITAL IN connector.
In this case it will not be possible to use the internal
effect or an external input from the AUX IN jacks.
INPUT 1/2
MASTER
DIGITAL IN
REC
SELECT