Pan/Balance; Fader; P2 External Output (Aux) Level Setting - Korg D8 Owner's Manual

P1-1 Channel number display..................................
[1, 2, 3, 4, 5, 6, 1-2, 3-4, 5-6, 7-8]
This shows the currently selected channel number.
1-2, 3-4 and 5-6 will appear when Pairing is On (refer
to PAIR On/Off).
P1-2 Effect send level settings
Adjusts the send level to the internal effect (refer to
EFFECT).
When [EFFECT ASSIGN] is INPUT 1/2
The send bus for all channels will automatically be
turned off, and the audio signal from the INPUT 1/2
jacks will be sent to the effect.
When [EFFECT ASSIGN] is MASTER (Send Type)
000–100: Adjust the send level to the master effect.
Wet: All of the audio from the selected channel will be
sent to the effect, and the Dry sound will not be sent to
the master bus.
When [EFFECT ASSIGN] is MASTER (Global Type)
The send bus of each channel will automatically be
turned off, and the sound of the master bus will be sent
to the effect.
This setting can be paired (refer to PAIR On/Off) and
stored in a scene (refer to SCENE).
P2
External output (Aux) level setting
Adjusts the level that is sent to AUX OUT (external
output) from after the channel faders (post fader).
Adjust this setting when you are using an external
effect device.
When [REC SELECT] is set to DIGITAL IN, and
[EFFECT ASSIGN] is set either to INPUT 1/2 or MAS-
TER (Global Type), it is not possible to use AUX IN
(external input).
1 2
Aux1 :000
P2-1 Channel number display .................................
[1, 2, 3, 4, 5, 6, 1-2, 3-4, 5-6, 7-8]
This shows the currently selected channel number.
1-2, 3-4 and 5-6 will appear when Pairing is On (refer
to PAIR On/Off).
P2-2 External output (Aux) send level setting[000...100,
Off]
Adjusts the send level to AUX OUT.
This setting can be paired (refer to PAIR On/Off) and
stored in a scene (refer to SCENE).
.................. [000...100, Wet]

24. PAN/BALANCE

Here you can adjust the pan/balance of the stereo sig-
nal sent from each channel to the master bus.
In the case of channels 1–6 for which pairing is Off
(refer to PAIR On/Off), this will be the pan adjustment
to the master bus.
In the case of channels (1–6) for which pairing is On
and for channels 7/8, this will be the left/right balance
adjustment to the master bus.
This setting can be paired (refer to PAIR On/Off) and
stored in a scene (refer to SCENE).

25. FADER

Adjusts the volume level.
The recording level is adjusted by the channel faders
when recording an external input (when [REC
SELECT] is INPUT 1/2 or DIGITAL IN). When record-
ing the master bus during track bouncing etc. ([REC
SELECT] is MASTER), the recording level is adjusted
by the master fader.
[CHANNEL] (1...7/8) faders
(playback/input recording level adjustment)
Adjusts the volume of each track.
For channels whose [TRACK STATUS] is PLAY, adjust
the playback level.
For channels whose [TRACK STATUS] is REC, adjust
the input level or recording level of the signals from
the INPUT 1/2 jacks or the DIGITAL IN jack.
[MASTER] fader
(master/master recording level adjustment)
Adjusts the volume level of the master bus.
This will determine the output volume of the OUTPUT
L/R jacks and the DIGITAL OUT jack.
When [REC SELECT] is INPUT 1/2 or DIGITAL IN,
this adjusts the volume level of the master bus.
When [REC SELECT] is MASTER, this adjusts the
recording level for tracks whose [TRACK STATUS] is
set to REC (ANALOG).
59