Setup items by operation
2.32.3
Status Notification Setting
1
In Administrator mode of PageScope Web Connection, select the Maintenance tab.
2
Select "Status Notification Setting".
3
Select "E-mail Address".
4
Select [Edit].
Item
Notification Address
Replenish Paper Tray
JAM
PM Call
Replace Staples
Replenish Toner
Finisher Tray Full
Service Call
Job Finished
Hole-Punch Scrap Box
Full
Waste Toner Box Full
Imaging Unit Yield
Fusing Unit Yield
Transfer Belt Unit Yield
bizhub C203/C253/C353
Definition
Specify the notification address.
Provides notification when a paper-out condition occurs.
Provides notification when a paper misfeed occurs.
Provides notification when a periodic inspection is required.
Provides notification when a staple-out condition occurs.
Provides notification when a toner-out condition occurs.
Provides notification when the finisher tray becomes full.
Provides notification when a service call occurs.
Provides notification when the job is completed.
Provides notification when hole-punch scraps must be re-
moved.
Provides notification when the waste toner box must be re-
placed.
Provides notification when the imaging unit must be re-
placed.
Provides notification when the fusing unit must be replaced.
Provides notification when the transfer belt must be re-
placed.
2
Prior confirmation
Notification address
2-113