Setup items by operation
2.33.3
TRAP Setting
1
In Administrator mode of PageScope Web Connection, select the Network tab.
2
Select "SNMP Setting".
3
Specify the following settings.
Item
Allow Setting
Trap Setting when Au-
thentication Fails
2.33.4
Status Notification Setting
1
In Administrator mode of PageScope Web Connection, select the Maintenance tab.
2
Select "Status Notification Setting".
3
Select "IP (IPX) Address".
4
Select [Edit].
!
Detail
For details on the settings, refer to "Status Notification Setting" on page 2-113.
bizhub C203/C253/C353
Definition
Select "Allow".
Select whether to enable the TRAP function when authenti-
cation failed.
2
Prior confirmation
2-117