Konica Minolta bizhub C353 User Manual page 211

Setup items by operation
When "Internet Fax" was selected using [Registration]
Item
No.
Name
Destination Information
Resolution
Subject
Text
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
2-Sided Binding Direc-
tion
Special Original
Erase
Compose
(Date/Time)
Compose
(Page)
Compose
(Header/Footer)
Compose
(Stamp)
Limiting Access to Desti-
nations
bizhub C203/C253/C353
Definition
Displays the registration number.
Type in the registration name (up to 24 characters).
Specify the address information.
Select "Select from Address Book" or "Direct Input".
Specifies the resolution.
Specify the E-mail subject.
To use the default subject, select "Not Specified". To check the contents of the subject,
click [Subject List].
Specify the E-mail text.
To use the default subject, select "Not Specified". To check the contents of the subject,
click [Text List].
Specify whether the original is 2-sided.
Specify the quality of the original, such as text or photo.
Specify whether to divide scanning of the original.
Specify the density.
Adjust the density of the background.
Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Click the [Display] button, and then specify settings for the functions that are displayed.
Specify the binding orientation of the original.
Specify the original in a different size.
Specify whether to perform frame erase.
Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Color"
"Pages", and "Size".
Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune",
"Color", and "Size".
Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Color", "Pages", and "Size". To check the registered stamp, click [Confirm Reg-
istered Contents]. To use the registered stamp function, stamps must be registered from
the control panel in advance.
Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
2
2-195