Bissell SYMPHONY PET 1132 Series Instructions Manual page 9

Maintenance & Care
Cleaning the Hose Tube
1. Grab bottom end of the hose and pull
lower portion away from the body.
2. Separate the hose into two pieces.
3. Wash hose and wait for it to dry.
4. Align the top of the hose to the groves
on the hose opening of the machine.
5. Twist hose down to insert lower portion
of hose into the machine.
6. Make sure hose fits tightly into the
steam mop.
Cleaning the Foot
1. To clean the foot and bristles, push the
release button on the back of the pivot
joint and pull the foot to release it from the
appliance.
2. Wash bottom of foot and bristles with
cold water.
3. Look for any clogging in the steam nozzle.
To clean, run water over steam nozzle.
NOTE: Make sure foot and bristles are dry
before reattaching.
4. To reattach the foot: place the foot on the
floor, push the appliance down into the foot and
then listen for it to "click" into place.
To reduce the risk of electric shock,
turn power OFF and disconnect
polarized plug from electrical outlet
before performing maintenance or
troubleshooting checks.
1.
5.
2.
WARNING
3.
6.
BISSELL.com 9