Operations - Bissell SYMPHONY PET 1132 Series Instructions Manual

All-in-one vacuum and steam mop
Table of Contents

Advertisement

Available languages

Available languages

Operations

Getting Ready
The washable mop pad may have already come
attached to the washable mop pad tray on the foot
of the machine. If not, please follow step 1 below.
For washable mop pads, please follow
these steps:
1. Attach washable mop pad.
a. Locate the washable mop pad tray.
b. Some machines may come with scent
discs. Add scent disc in the mesh pocket in
the washable mop pad. Use the whole
disc for a heavier scent or cut in half
for a lighter scent.
c. Wrap washable mop pad around the
bottom of the tray, making sure the gray
stitching is in the front and the Quick
Release Tab is in the back.
d. Place the assembled washable mop pad
tray down on the floor and set the steam
mop on top of the tray and push down until
it "clicks" into place.
Some machines may come with a disposable
mop pad option.
For disposable mop pads, please follow these
steps:
1. Attach disposable mop pad.
a. Locate the disposable mop pad tray and
open the top of the tray by lifting up on the
release tab on the side.
b. Open the side flaps on the disposable
mop pad.
c. Place opened tray on top of opened,
disposable mop pad. Wrap disposable mop
pad around the bottom of the tray, making
sure the sides of the disposable mop pad
are folded around to the top of the tray.
d. Close the tray by folding down, snapping
shut to secure the disposable mop pad in
place.
e. Place the assembled disposable mop pad
tray down on the floor and set the steam
mop on top of the tray and push down until
it "clicks" into place.
WARNING
» Do not operate appliance with damp
or wet fi lters or without all fi lters
in place.
» Tinted plates on foot may get hot
while steam mop is in use. Do not
touch while hot.
Washable Mop Pad
1b.
1c.
1c.
Disposable Mop Pads
1a.
1c.
1c.
1d.
1e.
BISSELL.com 5

Advertisement

Chapters

Table of Contents
loading

Table of Contents