Programing On/Off Features; Controls & Indicators; Lcd Control Center - Keurig B50 Use & Care Manual

Stopping the Brew Process
If you need to stop the brewing after the
process has started, press the Power Button to
turn the Brewer 'OFF'. The flow of coffee
or tea will stop, the heating element will shut
off and the green light illuminating the Power
Button will disappear.
NOTE: You may get less coffee or tea in
your cup during your next brew. We
recommend that you perform a cleansing
brew with water only after a terminated brew.
Then your NEXT brew will be the volume
you have selected.
Adding Water
The LCD Control Center of your Brewer will
indicate when the water level in the tank is low
or if the Water Reservoir has been removed by
displaying the words 'ADD WATER'. The
Brewer will not allow you to brew when 'ADD
WATER' is displayed.
NOT
READY
ADD WATER
The Water Reservoir can be filled in two ways.
1. Lift off the Water Reservoir Lid and pour
water directly into the Water Reservoir
while it is still attached to the Brewer, then
replace the Lid.
2. Remove the Water Reservoir from Brewer
by first removing Lid from Reservoir, then
lifting Reservoir straight up and away from
Brewer. Fill with water. Place the Water
Reservoir back on the Brewer and replace
the Lid.
IMPORTANT: Do not remove the Water
Reservoir during the brewing process.
8
Brewing Hot Water
Your Brewer is able to produce a cup of hot
water for making hot chocolate, for use in
cooking, for making soups, etc. Simply raise
and lower the handle on the Brewer without
adding a K-Cup ® portion pack. The LCD
Control Center will display 'READY' and the
Small and Large Cup Icons will blink. Be sure
to have a mug or cup on the Drip Tray and
then select the size you would like.
Purging the Brewer
If your Brewer has not been used for more
than one week, you should purge the water
from the inner tank.
1. If there is water in the Water Reservoir,
remove the Lid, then lift Reservoir straight
up and away from Brewer. Discard water,
rinse and refill with water. Place the Water
Reservoir back on the Brewer and replace
the Lid. (If there is no water in Reservoir,
simply refill.)
2. Be sure the Brewer is turned on. Raise and
lower the handle on the Brewer without
inserting a K-Cup.
3. The LCD Control Center will display 'READY'
and the Small and Large Cup Icons will
blink. Be sure to have a mug on the Drip
Tray and then select the larger size brew.
4. Repeat steps 2 and 3 two more times to
completely purge water from inner tank.
If you are experiencing any problems with
your Brewer, please contact Customer
Service at 1-866-901-BREW (2739).
SECTION 2
CONTROLS & INDICATORS

LCD Control Center

Setting the Clock
Setting the clock is optional. When the clock is
set, the time will appear in the LCD Control
Center. NOTE: You must set the clock if you
will be using the Auto On/Off Time program-
ming feature.
a. Press the button below 'MENU'.
b. The word 'OFF' will appear at the top of the
LCD Control Center to indicate that the
clock is not set. The words 'SET CLOCK',
'SET AUTO OFF' and 'SET ON TIME' will
appear in the LCD Control Center with an
arrow pointing to 'SET CLOCK'. H (Hour)
and M (Minute) will appear and blink.
OFF
Á
SET CLOCK
SET AUTO OFF
SET ON TIME
H M
MENU
c. Press or hold the black button under the
blinking H until you have reached the
appropriate hour. If the hour has passed
12, the indicator switches from AM to PM
on the LCD.
d. Press or hold the black button under the
blinking M to set the minutes.
e. When you have reached the correct time,
press the menu button four times to scroll
through the remaining programming
options and return to 'READY' mode.
f. The correct time should now be displayed
in the LCD Control Center.
NOTE: If power is interrupted to the
Brewer by unplugging it, or if power is lost,
follow the procedure above to reset the
time as the clock will not be visible until
the time is set.

Programing On/Off Features

The Brewer provides three modes so that you
can enjoy gourmet coffee or tea on your own
schedule. By programming your Brewer to
turn on each morning, you will never have to
wait for the Brewer to warm up to brew a
gourmet cup of coffee.
1. Leave it ON all the time (recommended).
The Brewer can be left on all the time so
that it is always ready to brew a fresh cup
of gourmet coffee or tea. To turn the
Brewer off at any time, simply press the
Power Button. (Note: Although the clock
remains on if set, you can not brew a cup
of coffee or tea.) Press the Power Button
again to restore power to the Brewer. You
will have to wait for the water to heat up
before the Brewer is ready to brew.
2. Set the Brewer to turn off at a specified
period of time after the last brew.
a. Press the MENU button twice to program
the AUTO OFF feature. The LCD Control
Center will now display 'SET AUTO OFF'
with a small arrow next to it.
10:00 PM
SET CLOCK
Á
SET AUTO OFF
SET ON TIME
H
MENU
b. Press and release the H Button to
advance 1 hour at a time, up to 9 hours.
c. After setting the desired AUTO-OFF time,
press the MENU button three times to
scroll through the remaining program
ming options and return to 'READY'
mode. 'AUTO OFF' will now be displayed
to indicate that it has been set.
9