Digital Connections - Kenwood VR-9080 Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital demodulator
(Commercially available)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to an RF digital demodulator (commercially available).
Next, connect the DIGITAL OUT jack of the demodulator to the DIGITAL IN jack of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
COAXIAL OPTICAL OPTICAL OPTICAL
CD/DVD VIDEO 3 MONITOR
VIDEO
2
DVD/
6CH
DIGITAL IN DIGITAL OUT
Optical fiber
cable
OPTICAL DIGITAL
IN (AUDIO)
Optical
fiber cable
MD Recorder
OPTICAL DIGITAL
OUT (AUDIO)
Optical fiber cable
Connect the video signal and analog
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
OPTICAL DIGITAL
OUT (AUDIO)
DVD Player or CD Player
COAXIAL DIGITAL
OUT (AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD Player
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
8
@
@
13 EN