Digital Connections - Kenwood KRF-V7050D Instruction Manual

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
COAXIAL DIGITAL OUT (AUDIO)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
PLAY IN REC OUT PLAY IN PLAY IN PLAY IN
L
MONITOR
OUT
DVD VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 3
R
A
R L
DVD
CD/DVD VIDEO 3
VIDEO 2
OPTICAL OPTICAL
COAXIAL
DIGITAL IN
Optical fiber cable
RF digital
demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL
RF OUT (AUDIO)
PCM OUT
B
R L
R L
C
Optical fiber cable
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
COAXIAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
Setting up the system
7
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
9
9
11