Table of Contents
Advertisement
Precautions in Projector Installation
For details on the installation precautions, see the operating instructions of the projector you are using.
The precautions below are for the NP-PA600 series.
•
Leave sufficient space to the left and right of the projectors so that there is no obstruction of projector air intake
and exhaust. Obstruction of air intake and exhaust will result in a rise of the internal temperature of the projector
and will cause breakdown.
•
Do not physically stack projectors one above the other.
Projectors that are physically stacked could fall causing damage and breakdown of the projectors.
Installation Example Using 2 Projectors
In consideration of using this software, we recommend an installation like the following when the installation
combines 2 projectors.
Installation Examples
Exhaust
Cabinet
Warning
Note
• Please see the user's manual of the projector for information about the range of projection distance.
Front
Ventilation inlet
Intake
Cabinet
• Please request ceiling mount and other special installation at your store of purchase.
Installation should never be undertaken by the customer. Doing so could result in
the projectors falling or in injury. A strong cabinet that will support the weight of the
projectors should be used in this installation. Do not stack the projectors directly one
upon the other.
Right side
Cabinet
5
Rear
Ventilation outlet
Advertisement
Table of Contents
