NEC NP-PA600 Series User Manual page 17

Stacking
Calibration
❸
Mode
Tiling
[Next]
❹
[Exit]
❺
Master Projector:
The projector that will serve as the master is determined, and the projection image
of another projector undergoes stacking correction so that it is in agreement with the
projection image of the master projector.
In this instance, the [GEOMETRIC CORRECTION] of the master projector does not
change.
Auto:
When there is a screen frame, the projection image is corrected so as to fit inside that
frame.
When there is no frame, correction is applied so that the area of the rectangle is
maximized within the superimposed portion of the projection area.
The aspect ratio of the input signal is not maintained at this time.
Specify Four Points:
On the web camera's captured images, set points at the four corners of the
image for tiling projection and correct to fit within this range.
Auto:
When the screen has a frame, the projected image is corrected so as to fit inside
that frame.
When there is no frame, correction is applied so that the area of the rectangle is
maximized within the projection range.
The aspect ratio of the input signal is not maintained at this time.
Display the calibration screen. ( Page 19)
Closes the Multi Screen Tool.
17
3. Multi Screen Tool Settings