Connections For Projecting An Image; For Analog Rgb Signals - NEC NP-PA600 Series User Manual

Connections for Projecting an Image

For analog RGB signals

COMPUTER1 IN
Projector
1
• When the projectors are connected with a daisy chain connection, the RGB video signal will be
Note
attenuated and its projection might not be possible. Use an RGB signal divider as illustrated in the
above connection diagram.
Daisy Chain Connection
RGB output
connector of PC
Reference
• Connections can also be made using commercially available BNC cable.
Computer cable (VGA)
2 3
Analog RGB signal divider
Analog RGB output
(Mini D-Sub 15 pin)
Analog RGB input
Computer cable (VGA)
COMPUTER1 IN
MONITOR OUT
2. Installation and Connection of Equipment
COMPUTER1 IN
Projector
Computer cable (VGA)
To displayed output
connector (Mini D-Sub 15 pin)
COMPUTER1 IN
14
COMPUTER1 IN
Computer
MONITOR OUT
To Computer 1 input
of the next projector
Projector