NEC NP-PA600 Series User Manual page 20

❾
❼
❽
❺
❻
Take Picture
❶
Camera Exposure and
❷
Settings Gain
Auto-Tune
Tools
❸
Show Focus
Pattern
Continuous
capture mode
Options
❹
Take picture after
manual adjustment
Preview Screen
❺
Image Borders
❻
Fit Image to Window Size/
❼
Display Image with Actual
Resolution/Zoom slider
Pan Mode
❽
Help
❾
Finish
❿
Setup Screen
Takes the photo.
If no camera is connected, this button is displayed as "Connect to Camera"
instead of "Photograph". Connect a camera.
When in the continuous capture mode, this changes to the [Start Capture] button.
Adjusts the camera's exposure and gain.
Adjusts to the optimum picture quality for calibration.
Displays a focus pattern (15 x 15 dots) on the projector.
Displays the web camera's continuous image on the preview screen.
Automatically takes the picture after manual adjustment.
Displays the image photographed by the camera. When "Continuous capture
mode" is checked, displays the web camera's continuous image.
This is only displayed when "Tiling"
Multi Screen Tool's main screen.
Drag the points at the four corners to set the range. After tiling correction, the
input signal is projected within this range.
Fit Image to Window Size:
The projected photograph is fit to the preview screen's window size.
Display Image with Actual Resolution:
The photograph is displayed with the actual resolution (magnification).
Zoom slider:
Zooms the preview screen in and out.
When zooming on the preview screen, the screen can be scrolled horizontally and
vertically.
Displays the EasyStack ™ help screen.
Completes the setup.
20
3. Multi Screen Tool Settings
→ "Specify Four Points" is selected on the
❶
❷
❸
❹
❿