Table of Contents
Advertisement
Be careful when connecting
additional electrical appliances.
Connection cables must not come
into contact with hot cooking
zones.
Testing
At the end of installation, carry out a brief
inspection test. If the hob fails to operate,
after checking that you have carried out the
instructions correctly, unplug the appliance
and contact Technical Support.
5.2 Instructions for the installer
• Do not bend or trap the power cable.
• The appliance must be installed
according to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
5.3 Power limitation procedure (for
installer only)
• This appliance is factory set to
operate at 7.4 kW.
• The technical menu has a total of
4 options. They are indicated by
the letter "C" and a progressive
number. They have different
levels of adjustment.
Accessing the technical menu
In order to modify the maximum power
absorbed by the appliance, you have to
access the technical menu. When
connecting to the mains supply for the first
Installation
time or after disconnecting and
reconnecting the appliance, follow these
instructions within 2 minutes:
1. Press and hold
2. With the
; an acoustic signal is emitted.
3. Immediately afterwards, press the
button of the front left zone; another
acoustic signal is emitted.
You have now accessed the technical menu
and the buttons can be released.
The display of the front left zone shows the
code associated with the option: the
symbol appears alternating with
rear left zone display shows the adjustment
levels corresponding to the power levels.
They can be selected using the
of the front left zone.
You can only scroll through the
levels in the upwards direction:
once the maximum level has been
reached, the selection starts from
the beginning again.
.
button pressed, press
. The
button
57
Advertisement
Table of Contents
