Table of Contents
Advertisement
3.4 Special functions
Pause function
• This function pauses the
operation of all the cooking
zones and all the timers that are
in progress.
• The Pause function can be
maintained for a maximum of 10
minutes, after which the
appliance switches off.
Press the
button to activate the Pause
function when at least one cooking zone
active. The
symbol and the icon
will appear above the Pause button on the
displays of all the cooking zones.
To deactivate the Pause function:
1. Press the
button.
2. Then press any button
3. The pause function has now been
deactivated and the previously set
functions are restored.
• The cooking time limitation and
the residual heat indicators
remain enabled during the
Pause function, while the
Booster functions are
deactivated.
• When the power comes back
on after a power failure, the
pause function will be
deactivated.
50
Use
Controls lock
This is useful to prevent functions being
activated by mistake (e.g. by children). In
order for the controls lock to be activated,
the hob must be switched on, without pans
and with the cooking zones set to 0:
1. Press the
2. Press the
The controls are now locked and the
symbols appear on the cooking zone
displays. They flash for about 10 seconds,
.
after which the hob switches off.
When the hob is switched on again, the
cooking zone displays again show
• Press the
• To deactivate the controls lock
If a zone is hot, the
displayed alternating with the
This function allows you to disable
all the buttons of the appliance,
except for the
lock remains active even if the hob
is turned off and then on again.
and
same time; an acoustic signal is emitted.
button immediately;
another acoustic signal is emitted.
and
same time to temporarily deactivate the
controls lock. It will be restored the next
time the appliance is switched on.
permanently, follow the instructions
described for activating it.
button. The
buttons at the
:
buttons at the
symbol will be
symbol.
Advertisement
Table of Contents
