Related Manuals for Smeg SI2M7953DW
Summary of Contents for Smeg SI2M7953DW
- Page 1 Notice d'utili‐ Benutzerin‐ User Manual sation formation Table de Kochfeld cuisson SI2M7953DW...
-
Page 2: Table Of Contents
CONTENTS Safety information Hints and tips Safety instructions Care and cleaning Installation Troubleshooting Product description Technical data Daily use Energy efficiency Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. - Page 3 General Safety WARNING: The appliance and its accessible parts • become hot during use. Care should be taken to avoid touching heating elements. Do not operate the appliance by means of an external • timer or separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil •...
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Installation • Before carrying out any operation make sure that the appliance is disconnected WARNING! Only a qualified from the power supply. person must install this • Make sure that the parameters on the appliance. rating plate are compatible with the electrical ratings of the mains power WARNING! Risk of injury or supply. - Page 5 disconnect the appliance from the • Used oil, that can contain food mains at all poles. The isolation device remnants, can cause fire at a lower must have a contact opening width of temperature than oil used for the first minimum 3 mm.
-
Page 6: Installation
Service • Contact your municipal authority for information on how to discard the • To repair the appliance contact an appliance correctly. Authorised Service Centre. • Disconnect the appliance from the • Use original spare parts only. mains supply. • Cut off the mains electrical cable close Disposal to the appliance and dispose of it. - Page 7 Assembly On-top installation min. 500mm min. R 5mm 50mm mm 880 min. 55mm min. 60mm If the appliance is installed above a drawer, the hob ventilation can warm up the min. items stored in the drawer 28 mm during the cooking process. You can instal a separation panel but it is not mandatory.
-
Page 8: Product Description
min. 12 mm min. 38 mm Integrated installation min. 12 mm min.55mm PRODUCT DESCRIPTION Cooking surface layout Induction cooking zone Control panel... - Page 9 Control panel layout 1 2 3 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field ON / OFF To activate and deactivate the hob. Lock / Child Safety De‐ To lock / unlock the control panel.
-
Page 10: Daily Use
Display Description There is a malfunction. + digit Eco-Heat (3-step Residual heat indicator): continue cooking / keep warm / residual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. Eco-Heat (3 step Residual heat The induction cooking zones produce the indicator) - Page 11 Heat setting The hob deacti‐ vates after 4 - 7 5 hours 8 - 9 4 hours 10 - 14 1.5 hour The heat setting MultiZone To set or change the heat setting: The function operates when the Touch the control bar at the correct heat pot covers the centres of the setting or move your finger along the two zones.
- Page 12 function can be activated for the induction CountUp Timer (The count up timer) cooking zone only for a limited period of You can use this function to monitor how time. After this time the induction cooking long the cooking zone operates. zone automatically sets back to the To set the cooking zone: touch highest heat setting.
- Page 13 comes on. The heat setting is lowered out. Touch for 3 seconds. to 1. comes on. Touch of the timer to To deactivate the function, touch choose one of the following: The previous heat setting comes on. • - the sounds are off Lock •...
-
Page 14: Hints And Tips
HINTS AND TIPS WARNING! Refer to Safety Refer to "Technical data". chapters. Cookware The noises during operation If you can hear: For induction cooking zones a strong electro-magnetic field • crack noise: cookware is made of creates the heat in the different materials (a sandwich cookware very quickly. -
Page 15: Care And Cleaning
Heat setting Use to: Time Hints (min) Keep cooked food warm. Put a lid on the cookware. nec‐ essary 1 - 3 Hollandaise sauce, melt: but‐ 5 - 25 Mix from time to time. ter, chocolate, gelatine. 1 - 3 Solidify: fluffy omelettes, baked 10 - Cook with a lid on. -
Page 16: Troubleshooting
Clean the hob with a moist cloth and a with vinegar and clean the glass non-abrasive detergent. After cleaning, surface with a cloth. wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water TROUBLESHOOTING WARNING! Refer to Safety chapters. - Page 17 Problem Possible cause Remedy The highest heat setting is The highest heat setting has set. the same power as the func‐ tion. The heat setting changes Power management oper‐ Refer to "Daily use". between two levels. ates. The sensor fields become The cookware is too large or Put large cookware on the hot.
-
Page 18: Technical Data
Service Centre and conditions of guarantee are in the guarantee booklet. TECHNICAL DATA Rating plate Model SI2M7953DW PNC 949 594 491 00 Typ 62 E5A 02 AA 220 - 240 V / 400 V 2N 50 - 60 Hz Induction 7.35 kW... - Page 19 Diameter of circular cook‐ Left front 21.0 cm ing zones (Ø) Left rear 21.0 cm Middle front 28.0 cm Right front 21.0 cm Right rear 21.0 cm Energy consumption per Left front 179.6 Wh / kg cooking zone (EC electric Left rear 177.0 Wh / kg cooking)
- Page 20 867350347-A-472018...