Introduction - Husqvarna AUTOMOWER 405X Operator's Manual

1.1 Introduction

Serial number:
Product number:
PIN code:
The serial number and the product number are on the product rating plate and on the product carton.
• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.
1.1.1 Support
For support about the product, speak to your Husqvarna
servicing dealer.
1.1.2 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
3 .
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically. It
continuously alternates between mowing and charging.
The movement pattern is random, which means that the
lawn is mowed evenly and with less wear. The boundary
wire and the guide wire controls the movement of the
product within the work area. Sensors in the product
senses when it is approaching the boundary wire. The
front of the product always passes the boundary wire
by a specific distance before the product turns around.
When the product hits an obstacle or approaches the
boundary wire the product selects a new direction.
1650 - 005 - 17.03.2022
1 Introduction
The operator selects the operation settings with the keys
on the keypad. The display shows the selected and
possible operation settings, and the operation mode of
the product.
1.1.2.1 Mowing technique
The product is emission free, easy to use and saves
Support on page
energy. The frequent cutting technique improves the
grass quality and decreases the use of fertilizers.
Collection of grass is not necessary.
1.1.2.2 Find the charging station
The product operates until the battery state of charge
is low, then the product starts to go to the charging
station. The guide wire is put from the charging station
to a remote part of the work area or through a narrow
passage. The guide wire is connected with the boundary
wire to make it easier and faster for the product to find
the charging station.
1.1.2.3 Automower
Automower
it possible to select the operation settings remotely.
Refer to
1.1.2.4 Automower
Automower
in the Automower
Intellegent Mapping (AIM) to make a virtual map of your
lawn and installation. In the map you can make virtual
work areas and stay-out zones. Refer to
Intellegent Mapping (AIM) on page 21 .
®
Connect
®
Connect is a mobile application that makes
Automower ® Connect app on page 20 .
®
Intellegent Mapping (AIM)
®
Intellegent Mapping (AIM) is available
®
Connect app. Use Automower
®
®
Automower
Introduction - 3