Audio Page (Vn-V26U Only) - JVC VN-V25U VN-V26U Instructions Manual

Setting Using Internet Explorer
Setting (continued)
Audio Page (
VN-V26U only)
This page is for setting the audio parameters.
This page can be used during access using AadminB or AoperatorB
● To enable the new settings, press the [OK] button.
A
Duplex Mode
B
Mike Gain
46
For setting the audio transmission method.
When half duplex is selected, audio sent to computers from the camera is
muted when audio is transmitted from a computer to the camera.
When full duplex is selected, you can send audio to the camera from a
computer while listening to audio sent to computers from the camera
[Set values: Half Duplex, Full Duplex]
Note:
● When AFull DuplexB has been set, there may be cases where echos will
happen as a result of the audio sent from the computer gets picked up by
the VN-V26U's internal mike. In that case select AHalf DuplexB.
For specifying the gain value for the built-in microphone of VN-V26U.
[Set values: 0 dB, 20 dB, 26 dB, 32 dB]
A
B