Features For Recording; Led Light; Live Slow; Wide Mode - JVC GR-D370AH Instructions Manual

LED Light

LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
1
Press LIGHT repeatedly to
change the setting.
OFF: Turns off the light.
ON: The light is on always. (
AUTO: The light turns on automatically when
dark. ( appears.)
2
Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
NOTES:
Be careful not to point the LED Light directly to eyes.
If the light does not reach the subject when the
LED Light setting is "ON", the Night-Scope
function will be activated, and makes it possible to
shoot the subject brighter.
There is a difference in the brightness of the
images shot between the center area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
Since subjects are shot at a reduced shutter
speed when the LED Light setting is "ON", they
will appear slightly blurred.

Live Slow

This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the recording mode to "
3
Select and set "SNAP/SLOW" to "SLOW".
( pg. 32, 34) The Live Slow indicator "
appears.
4
Press SNAPSHOT (SLOW) during recording
or playback.
The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
This feature is effective when the recording
mode selection is set to both "
NOTE:
Available only when the VIDEO/MEMORY Switch is
set to "VIDEO".
This camcorder allows you to choose the type of
image output format for video recording.
1
2
selection.
LED Light
appears.)
[4:3]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio. When using this mode on a TV with a
normal screen ratio, refer to your TV's instruction
manual.
16:9: For playback on TVs with an aspect ratio of
16:9. Naturally expands the image to fit the
screen without distortion. The "16:9" indicator
appears. When using this mode, refer to your
wide-screen TV's instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, select "4:3TV" in "16:9" (
36) to prevent vertical elongated images.
[ ] = Factory-preset
NOTES:
M
". pg. 16)
(
"
A
M
" or " ".

FEATURES FOR RECORDING

Wide Mode

Set the Power Switch to "REC".
Press 16:9 button repeatedly to choose your
4 : 3
Available only when the VIDEO/MEMORY Switch
is set to "VIDEO".
Still images are recorded at 4:3 mode. They
cannot be recorded at 16:9 mode.
37
EN
16 : 9
pg. 34,