Selecting 2Nd Stage Turn Off Temperature - Carrier 33CS450-01 Owner's Manual

2 2
Selecting Selecting nd Stage Turn nd Stage Turn
Off Temperature Off Temperature
If ON is selected, the second stage of cooling or heating will remain
energized until the thermostat reaches the setpoint on the thermostat
display.
If OFF is selected, the second stage of cooling or heating will turn off
after reaching the 1st stage
information).
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
13
On
Select On or Off:
On - 2nd stage will
remain on until
setpoint is reached.
Off - 2nd stage will
turn off after reaching
Off
1st stage deadband.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
deadband (see page 13.4 for more
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
29
2
Setup
OFF
Page 13.7
Carrier
MODE
MODE
Press
PROGRAM