Controller Keypad - Kohler 6VSG Operation Manual

AUTO button and LED
OFF button and LED
Figure 14 VSC User Interface
3.2.1

Controller Keypad

The RUN, OFF, and AUTO buttons control the generator set as described in Figure 15. Use the Select, Up arrow, and Down
arrow buttons to navigate through the menus and change settings, if necessary. See Section 2.4 for operation instructions.
Button Button Function
RUN Starts the generator set. The engine start time delay is ignored.
Stops the generator set. The cooldown time delay is ignored.
OFF During the engine crank cycle, pressing OFF will stop the crank cycle.
Press OFF to clear faults and reset the controller.
AUTO Places the generator set in Automatic (standby) mode.
Down arrow
Use to navigate through menus and change settings. This manual contains instructions to navigate the controller menus
Select
and adjust settings on the VSC controller.
Up arrow
Figure 15 VSC Controller Pushbutton Operation
28
2-line LCD display
25% load LED
50% load LED
100% load LED
75% load LED
Up button
Select button
Down button
RUN button and LED
KPS_050
GM81498
TP-6843 12/21