3.3.5
Braking system
A ebike's brake system is primarily operated
using the brake lever on the handlebars.
If the left brake lever is pulled, the brake on the
•
front wheel is applied.
If the right brake lever is pulled, the brake on the
•
rear wheel is applied.
The brakes are used as an emergency stop
system and bring the bicycle to a halt quickly and
safely in the event of an emergency.
The brake is applied using the brake lever either
•
with the brake lever and shift cable (mechanical
brake) or
•
with the brake lever and hydraulic brake cable
(hydraulic brake).
3.3.5.1 Mechanical brake
The brake lever is connected with the brake via
a cable inside the cable housing.
Figure 26: Cable inside cable housing
2
3.3.5.2 Hydraulic brake
The brake fluid is in a closed hose system. If the
brake lever is pulled, the brake fluid transfers
pressure to the brake on the wheel.
2
3
4
Figure 27: Components in a brake cable
1
Brake cable
2
Cable clip
3
Union nut
4
Cover cap
5
Knob
6
Insert pin
Description
1
6
5
38